COMMODITY: Cap-Chur Powerloads

SPECIAL: Limited Quantity of Division 1.4S

MODE OF TRANSPORTATION: Domestic Air

________________________________________________________________________

OVERVIEW

PROPER SHIPPING NAME:	Cartridges for tools, blank	LABEL:	No
IDENTIFICATION NUMBER:	UN 0014	PLACARD:	No
HAZARD CLASS/DIVISION:	1.4S	EMERG. INFO:	No
PACKING GROUP:	None	TRAINING:	Required
DOCUMENT:	No	PACKAGING:	Special
MARKING:	LQ Mark

HAZMAT TABLE

(1) Sym-bols

(2) Hazardous materials descriptions and proper shipping names

(3) Hazard class or Division

(4) Identifi-cation Numbers

(5) PG

(6) Label Codes

(7) Special provisions (§172.102)

(8) Packaging (§173.***)

(9) Quantity Limitations (see §§173.27 and 175.75)

(10) Vessel stowage

Excep-tions

Non- bulk

Bulk

Passenger aircraft/ rail

Cargo aircraft only

Loca- tion

Other

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8A)

(8)

(8C)

(9A)

(9B)

(10A)

(10B)

Cartridges for tools, blank

1.4S

UN0014

none

63

62

None

25kg

100kg

01

25

PACKAGING INFORMATION

Cartridges for tools, blank that have been classed as Division 1.4S explosive may be transported as limited quantities when packaged as follows:

– Cartridges must be packed in inside boxes, or in partitions that fit snugly in the outside packaging, or in metal clips; no single packages allowed i.e. inner packages are required.

– Except for 22 rimfire, primers must be protected against packaging or another cartridge base.

– Inside boxes, partitions or metal clips must be packed in securely-closed strong outside packagings; no specification testing is required.

– The maximum gross weight is limited to 30 kg (66 pounds) per package.

Citation: 49 CFR 173.63 (b)(2)

________________________________________________________________________

SHIPPING PAPER REQUIREMENTS

Unlike domestic road, domestic air shipments are not excepted from documentation. The documentation is like for 1.4S domestic road, except that “LTD QTY” is added to the end of the shipping description. Like for domestic road, the net weight is an acceptable alternative for the net explosives weight.

HM	DESCRIPTION	WEIGHT/LBS.
X	UN 0014, Cartridges for tools, blank, 1.4S, LTD QTY	(Insert net weight or net explosives weight)

Citation: 49 CFR 173.63(b)(1)(i)

________________________________________________________________________

CARTON MARKING

Limited quantity packages containing cartridges, small arms (ammunitions) must display the limited quantity marking on one side. Unlike for domestic road, the proper shipping name is required for domestic air. Two examples are shown. One is the minimum requirements, and the other is an optional way to use a 1.4S hazard label with “Cartridges for tools, blank” and “UN 0014” as used for international air.

In addition, each carton may have to be marked with the consignor’s or the consignee’s name and address, see 49 CFR §172.301(d) for exceptions*.

* Per 49 CFR §172.301(d), the package must be marked with the consignor or consignee’s name and address unless the package is:

(1) Transported by highway only and will not be transferred from one carrier to the other;

(2) Part of a carload lot, truckload lot or freight container load, and the entire contents of the rail car, truck or freight container are shipped from one consignor to one consignee.

Citation: 49 CFR §173.63(b)(1)(i), 49 CFR §172.301(d) & §172.315 (a)

________________________________________________________________________

OVERPACKS

The “OVERPACK” marking is only required if the limited quantity marking is not visible, in which case the “Limited Quantity” and “overpack” stickers are required on only one side of the pallet or overpack box.

Citation: 49 CFR §173.25(a)(6)

________________________________________________________________________