COMMODITY: Cap-Chur powerloads

SPECIAL: Limited Quantity of Division 1.4S

MODE OF TRANSPORTATION: Domestic Road – Less than truck load (LTL) and truck load (TL) service

________________________________________________________________________

OVERVIEW

PROPER SHIPPING NAME:	Cartridges for tools, blank	LABEL:	No
IDENTIFICATION NUMBER:	UN 0014	PLACARD:	No
HAZARD CLASS/DIVISION:	1.4S	EMERG. INFO:	No
PACKING GROUP:	None	TRAINING:	Required
DOCUMENT:	None	PACKAGING:	Special
MARKING:	LQ Mark

HAZMAT TABLE

(1) Sym -bols

(2) Hazardous materials descriptions and proper shipping names

(3) Hazard class or Division

(4) Identifi-cation Numbers

(5) PG

(6) Label Codes

(7) Special provisions (§172.102)

(8) Packaging (§173.***)

(9) Quantity Limitations (see §§173.27 and 175.75)

(10) Vessel stowage

Excep-tions

Non- bulk

Bulk

Passenger aircraft/ rail

Cargo aircraft only

Loca- tion

Other

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8A)

(8)

(8C)

(9A)

(9B)

(10A)

(10B)

Cartridges for tools, blank

1.4S

UN0014

none

63

62

None

25kg

100kg

01

25

PACKAGING INFORMATION

Cartridges for tools, blank that have been classed as Division 1.4S explosive may be transported as limited quantities when packaged as follows:

– Ammunition must be packed in inside boxes, or in partitions that fit snugly in the outside packaging, or in metal clips; no single packages allowed i.e. inner packages are required.

– Except for 22 rimfire, primers must be protected against packaging or another cartridge base.

– Inside boxes, partitions or metal clips must be packed in securely-closed strong outside packagings; no specification testing is required.

– The maximum gross weight is limited to 30 kg (66 pounds) per package.

Citation: 49 CFR 173.63 (b)(2)

________________________________________________________________________

SHIPPING PAPER REQUIREMENTS

Normal documentation requirements are waived when transported by road. This ammo is still hazmat, but it is not marked as hazmat on the shipping document because it is not subject to documentation requirements.  To allow mixed shipment of ORM-D and LQ packages, ORM-D or LQ should not be written in the description; only “Cartridges for tools, blank” should be listed, and even that is not mandatory.

HM	DESCRIPTION	WEIGHT/LBS.
	Cartridges for tools, blank	(Insert gross or net weight)

 

Citation: 49 CFR 173.63(b)(1)(i)

________________________________________________________________________

CARTON MARKING

Limited quantity packages containing blank cartridges for tools must display the following limited quantity marking on one side as:

In addition, each carton may have to be marked with the consignor’s or the consignee’s name and address, see 49 CFR §172.301(d) for exceptions. No UN number or proper shipping name is required.

Citation: 49 CFR §173.63(b)(1)(i) & §172.315 (a)

________________________________________________________________________

OVERPACKS

The “OVERPACK” marking is only required if the limited quantity marking is not visible, in which case the “Limited Quantity” and “overpack” stickers are required on only one side of the pallet or overpack box.

Citation: 49 CFR §173.25(a)(6)

________________________________________________________________________